Viewing a single comment thread. View all comments

suflaj t1_iyh4h4x wrote

Reply to comment by normie1990 in [Discussion] Should I go with Threadripper 5000 and multi-GPU, or Ryzen 9 with single GPU? by normie1990

No. The reason you put the radiator on top is so air doesn't fill up in the water block. Air in the water block means no cooling, since air barely conducts heat. Therefore you'd need a case big enough to mount both the radiators on top or keep one of them outside the case.

0

duschendestroyer t1_iyhi2tn wrote

You just need one rad or reservoir that's higher than the pump and blocks. This is really a non issue with custom loops.

1

suflaj t1_iyhi4z6 wrote

One radiator cannot handle 4 4090s, unless it's the size of at least 2 ordinary ones.

1

duschendestroyer t1_iyhj2sz wrote

sure, you want as many as you can get, but only one needs to be mounted high.

1

normie1990 OP t1_iyhja0s wrote

He meant that just one of the radiators needs to be higher

1