Viewing a single comment thread. View all comments

DStanizzi t1_ja8f9si wrote

Please tell me you have those Neapolitan switches in it as well?

1

purplespaceman t1_ja8gsxu wrote

That is why I came here. I have them unfilmed and unlubed and was wondering should I film and lube them.

1

DStanizzi t1_ja8k58j wrote

I lubed and filmed them. Tried them stock, lubed, and lubed and filmed. I would say that that light lubing (especially on the spring and the stem and rails) is a good idea. The springs ping quite a bit without lube and there is scratchiness on the stem that will improve with lube. Just be careful to not lube the leaf and legs or you will lose some of the tactility. I would say filming is not needed with these switched but adding a 0.15mm or 0.3mm film while you have the switch open can't hurt.

1

MahouShounenW OP t1_ja8gvmy wrote

Sadly no. :(. As much as I wanted, I’m still linear gang. Maybe later down the road !

1