Comments

You must log in or register to comment.

SoundsBroken t1_j9ndlxn wrote

I recently purchased one as my first proper mechanical keyboard. I am pretty happy with it apart from the case bending when built. I have not been able to fix that, I assume it is because of the knock-off Lego pieces it uses. If anyone has any solutions to this, I would appreciate if they could share them.

I also bought the upgraded stabalisers from the site with the kit (they sent two lots of them rather then the stock ones included in the kit). I would say they are not worth it, they are supposed to be pre-lubed but mine were almost dry. I have relube them to get rid of the rattles.

2

astroamy24 t1_j9opuqg wrote

Fwiw, my keyboard bends slightly even with genuine LEGO bricks. Only a slight bit, but it’s there.

2

SoundsBroken t1_j9os2j2 wrote

I only bought mine the other week and it includes the updated kit contents. It now includes some rubber feet and silicone dampening for the inside. The feet offset the curve enough that I do not notice it.

I imagine the two pieces that many to the base contribute to bend. If it were a single piece that was thicker I do not think it would be an issue.

2

AutoModerator t1_j9khixr wrote

ANY content that features products, services you sell, your prototypes in progress or items you were sponsored to post MUST use the Promotional flair, with disclosure of who you represent.

When posting your build, please provide a description of the build, preferably as a Top Level Comment or Reply to this Comment, with the following information:

  • Your keyboard featured and its layout

  • The Switches, Keycaps, and Other Accessories Featured

  • Any notable mods you performed

  • Other helpful information such as low profile, lesser known firmware, etc.

Example: Unobtanium Southpaw 1800 with DSA Salt with MorningCaps Artisan and Alps Rainbow Switches, modded with Sorbothan Foam on KMK

I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.

1

AutoModerator t1_j9khiyq wrote

ANY content that features products, services you sell, your prototypes in progress or items you were sponsored to post MUST use the Promotional flair, with disclosure of who you represent.

When posting your build, please provide a description of the build, preferably as a Top Level Comment or Reply to this Comment, with the following information:

  • Your keyboard featured and its layout

  • The Switches, Keycaps, and Other Accessories Featured

  • Any notable mods you performed

  • Other helpful information such as low profile, lesser known firmware, etc.

Example: Unobtanium Southpaw 1800 with DSA Salt with MorningCaps Artisan and Alps Rainbow Switches, modded with Sorbothan Foam on KMK

I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.

1

Thomathius t1_j9lbt03 wrote

Do you have issues with the corner keys actuating? I had to fill the base to make my escape key work.

1

Hipocras OP t1_j9lj8zd wrote

Funnily enough yes! Escape, backspace and the letter A gave me some gyp initially but after some trial and error they worked fine.

1

SoupPv18 t1_j9lrjyu wrote

Coiled Cable is absolutely screaming right now

1