Submitted by cruzkinegaming t3_123scd2 in MechanicalKeyboards
NoOne-NBA- t1_jdwy2sq wrote
Reply to comment by cruzkinegaming in Keyboard manufacturers outside of China by cruzkinegaming
>Each time I go to meets its normally the same thing you see over and over just with different variations.
This is the point at which you need to decide whether to let your own creativity loose.
If YOU design your own keyboard(s), you can make them as different from everything else out there as you want.
You don't necessarily have to design everything from scratch either.
You can buy some portions outright, and have other portions custom built.
The keyboards in the pic below both use off-the-shelf KPRepublic 60% cases, but are a night and day departure from the original keyboards those cases were designed to house.
I designed those layouts myself, for my own use, in two very specific locations.
I had plates cut, to mimic the mounting of the originals, but with dramatically different layouts, then hand-wired everything together, using Elite-C controllers.
cruzkinegaming OP t1_jdwyxno wrote
This is awesome! The Ergo/Ortho community also is so inspiring. Totally on a different level.
Viewing a single comment thread. View all comments