Submitted by an_unlucky_engineer t3_z0ka4o in MechanicalKeyboards
Comments
Nice-Independent7859 t1_ix7wzwg wrote
Maybe you should design your own pcb! I've managed to design one without any previous expeirience pretty easily. It really makes the build that much easier, and it's cheap aswell at only 20$ for 5 pcb's if you order at jlcpcb.
deaconblue42 t1_ixahsel wrote
Cool, what's the plate/case made of?
an_unlucky_engineer OP t1_ixfqio0 wrote
It is just a PCB that i painted in white
an_unlucky_engineer OP t1_ixframw wrote
This is a custom pcb design, I made the board using a homemade method (using the dry film) it wasn't perfect, if you look with more attention you will see that the key are not aligned, I made some mistakes when I was drilling the board
an_unlucky_engineer OP t1_ixfrlnp wrote
I know, I did some mistake while drilling the holes in the pcb and also the keycaps weren't designed for this type of keyboard, but for my first build I'm very happy with the result
MrDexterReddit t1_ixgbikc wrote
Oh yeah you should see my first soldered board, way worse than this. Great results :D
MrDexterReddit t1_ix77djx wrote
That bottom row sure is squiggly