Viewing a single comment thread. View all comments

panniyomthai t1_iwzz777 wrote

Considering that the k70 isn't hotswappable, you would need to take everything apart and desolder the switch.

1

aeiou403 OP t1_ix42lc6 wrote

the problem my left-shift key does not work I press it on the left edge of the keycap, and it only works if press it in the center what could be the problem?

1

panniyomthai t1_ixghgsq wrote

To isolate your issue, pull out the keycap and press directly on the switch. If the switch does work as intended, then it may be an issue from 2 causes:

  1. Improper installment of stabs/factory flaws (not soldered evenly, or maybe slightly bent to begin with).
  2. Bent keycap, which could then pull on the two sides of the stab unevenly.
2