Viewing a single comment thread. View all comments

mcheddadi OP t1_iy8ycxe wrote

EDIT: soundtest here: https://youtu.be/gVflzZIRNrs

Build done with 19$ Nuphy TES68. it's a nice board for the price, but it has its quirks. no usb port but 2.4ghz with receiver lol. I cut all the plastic divisions and standoffs and then basically friction mounted it to make it sound even. I then used polyfil with microfiber fabric and some tricks on the space bar and backspace to make it sound less like a hollow nasty plastic shell and more like a uniform sounding build. Turned out nice aesthetically and "ok" soundwise in the end :D

6

redcloud t1_iy937q1 wrote

That's the same color TES68 that I bought. Can I ask what you did to the space bar and backspace?

3

mcheddadi OP t1_iyac9k8 wrote

I taped the stab wire cutouts around the spacebar switch on the plate and put some memory foam bellow the PCB just for it and taped the top of the switch housing with velora PE tape and put a poron switch film underneath it. For backspace I used a L&F Cherry MX red.

2

YoyoButter t1_iy9m6p5 wrote

GMK clone 8008 keycaps set in picture.

−5

Nbaysingar t1_iybb9no wrote

Only $20? Even for a cheap tray mount kit, that price is remarkably low, especially considering that it's bluetooth and hotswap.

2