Comments

You must log in or register to comment.

HV_Medic t1_j1nna5f wrote

Lovely tool, I wish I had bought one much sooner than I did. Would have saved so much time that I spent desoldering with braid and cheap solder suckers, it made projects that used to take an entire afternoon of work take 15 minutes. My advice though would be to get extra tips, cleaning pins, and ceramic filters. Depending on how much rework you do, you could go through them like water. Also, the little mini drill in a pin vise that Hakko sells is useful for clearing really stubborn nozzles.

3

HV_Medic t1_j1on6od wrote

Yes, they are all Hakko products and here are the part numbers:

The nozzle that comes with the FR-301 is N61-08 (it has a 1.0mm opening).

The cleaning pin for that nozzle (1.0mm) is B1087.

The drill cleaner is B1303 for 1.0mm nozzles.

The ceramic filters are A5044 (in a ten pack).

The FR-301 uses the N61 series nozzles and there are many to choose from, see Hakko's website for more, but the N61-08 is probably the most popular.

So far, I've gotten all of these parts from Amazon, but I'm sure there are plenty of other vendors that have them including from Hakko directly.

4

shugix t1_j1opl2j wrote

I would recommend getting a 888-001 Cleaning Drill. I found it quite useful the times mine got clogged. Most of my clogs are at the opening of the solder holder tube thing.

4

CorrodedRose t1_j1p8fx7 wrote

Holy moly $250? I was wondering why people use solder suckers

1