KBO-5000 build with custom 3-D printed tenting and bracket to hold the two halves at a fixed angle.andykuan OP t1_j00hwr7 wrote
Reply to comment by saltyreddrum in KBO-5000 build with custom 3-D printed tenting and bracket to hold the two halves at a fixed angle. by andykuan
I actually quite like my DIY spacebars. I originally bought some 2.25u spacebars off of AliExpress and they were not only soulless but also not particularly comfortable. So I took my time designing/printing/sanding some homemade ones. The really important step, for me, was sanding that edge of the spacebar against which my thumbs rest. That had to be smooth and curved. Next most important was to get many many layers of clearcoat on it. That gave it a finished feel.
Anyway, fwiw, here's my .STL for it: 2.25u spacebar
saltyreddrum t1_j0f3pok wrote
Awesome! Imma give it a go. Thanks!
Viewing a single comment thread. View all comments