Viewing a single comment thread. View all comments

EmoHarl t1_j62wng7 wrote

I am wondering if you have a cherry profile space bar and if I can get a picture of it on there? :) Someone is selling a sandglass on mechmarket if they still have it and I don't like gaps around my space bars like I have on my keychron q10 so wondering if it still has that gap with cherry. Also does it have any flex or bounce at all when fullt assembled?

1

LegendOfPeanuts t1_j63ak3s wrote

What gap?

2

EmoHarl t1_j64uef6 wrote

The space bar over by the fn key. It's not level with the case bothers me by op said it doesn't look like that from the top

1

damage449 OP t1_j6424lr wrote

Can't get a picture with a different space bar on right now. Maybe later. Honestly, from above, the gap between this KAT space bar and the case edge looks to be just the same as the spacing between the top edge of the space bar and the bottom edge of the row of keys above it. I wouldn't want less room, since stabilized keys to have a bit of skew or twist to them. You'd end up contacting the case edge. Also, the bottom of the space bars dips below the height of the case, so the caps aren't floating at all. Hope that helps explain things.

This board has gasket-mounted, skeleton-style aluminum plates on either side that offer quite a bit of flex if you push down on keys, especially near the center of the alpha areas. The feel is not bouncy, just a bit muted. Really nice, IMO.

1