Submitted by The_Waxies_Dargle t3_yoljd0 in baltimore

The signal cuts out of my Traynor tube amp. It usually runs for a couple of minutes before the signal just drops. I can sometimes wiggle the input line and get it back, but it's usually only temporary.

Obviously looking to balance price and competency.

2

Comments

You must log in or register to comment.

steam281 t1_iveq1l5 wrote

I’ve had a couple amps worked on at Big Crunch and have always been happy.

7

TalkShowHost99 t1_ivewys6 wrote

Came here to say this. Had my Fender Twin serviced by Big Crunch - they did a great job. Bill’s Music in Catonsville has also always done a great job working on my gear too.

2

20ooo t1_ivf62t3 wrote

Just want to throw in my big crunch recommendation. Also old town lutherie for any guitar issues.

2

mrbreakfast825 t1_ivfuk5y wrote

Here to cast another vote for Big Crunch. About a dozen of my friends have had their amps serviced there, and they’ve all been happy with the results every time.

2

MiPaR5050 t1_ivepjf9 wrote

Sounds like you may have a bad tube in there somewhere. I work on amps, and I've found that this issue is usually related to a tube.

​

When you hear the signal drop out, turn off and unplug your amp. Give it about 15 minutes and listen to the amp...if you hear any feedback or popping sounds you'll know its a bad tube.

Also, check the color of the tubes. Any purplish coloring means a bad tube.

​

I wouldnt know for sure without looking at the amp, but given the loss of signal its generally related to a tube.

4

wampuswrangler t1_ivfxu8b wrote

^ 2nd this. Especially if the Amp starts with full power and then dies off after a minute of use. Good sign that one of the tubes isn't able to handle the amperage running through it when there's more current draw. You should try buying a new tube and replacing one at a time and see if the issue still persists and work your way down the line with the one new tube until you've tried them all.

You could save yourself decent money by doing this by not having to pay for getting it serviced. Then if that turns out to not be the issue you still have a new tube which you will need eventually anyhow.

1

The_Waxies_Dargle OP t1_ivg50l6 wrote

This is what I am doing. I am replacing the power tubes first and then I will try the others.

Any idea which part of the inside fo the amp I shouldn't touch if I don't want to die.

1

wampuswrangler t1_ivgl6iq wrote

Yeah good move, it might just be one tube so you might be able to get away with buying one and try replacing one at a time til you find which one is out. But you should be fine, just have the Amp unplugged when you remove and replace each tube and then plug it back in to try it out.

2

The_Waxies_Dargle OP t1_iw0eft8 wrote

GOT TWO NEW POWER TUBES AND IT WORKS GREAT. THANKS FOR THE INPUT!

2

wampuswrangler t1_iw0hjeh wrote

Hey awesome! I'm super glad to hear it. You just saved yourself some good money and time without your Amp. And doing that stuff makes you feel super accomplished and badass hahah. I haven't taken my equipment to the shop in like 10 years thanks to YouTube and strangers on the internet, glad I could be on the otherwise and help!

2

MiPaR5050 t1_ivj7o6f wrote

Yeah, you should have no issues pulling out and replacing each tube to see if you have a faulty one in there somewhere...

As far as the parts you shouldn't touch, all that stuff is inside the head....it's those big capacitors you need to watch out for. Feel free to message me if you have any other issues. I also have a bias probe if you should need.

1

The_Waxies_Dargle OP t1_ivjaiao wrote

Thank you, man. I have it torn apart and have pulled the tubes just to look at them. I'll 100% hit you up if I need a bias probe.

Um...anyone know what a bias probe is used for?

1

The_Waxies_Dargle OP t1_ivfl8wm wrote

Interesting. Against my better judgment I opened her up. The three preamp tubes all look the same. But one of the two power tubes (the EL84) looks different. One is silver/metalic on the top whereas the other is a dark, almost obsidian color. It's subtle, but they do look different.

Going to try and upload a pic.

0

techandbluez t1_ivh7tpd wrote

Bill's Music, they have fixed anything I've ever given them superbly, solid team of techs.

https://billsmusic.com in Catonsville, just a few blocks inside the Beltway exit. Onsite free parking next to the store or metered parking in front of the store.

1

SewerRanger t1_ivhi52s wrote

Not quite in Baltimore, but Just Audio in white marsh specializes in tube and vintage audio.

1

The_Waxies_Dargle OP t1_ivhopmz wrote

Thanks for all the answers everyone. I'm going to take a run at it myself and then it's going to be either Big Crunch or Bills (who I love).

Peace!

1