Submitted by u193 t3_11dqiai in explainlikeimfive

I looked up the modulus of elasticity for Southern Pine and it's 1,800,000 PSI. Looking up the definition of what the MOE is at first makes sense I thought; however, when putting it into perspective, this equates to 450 cars (if weighing 4,000lbs each) stacked on a 1-inch by 1-inch area which seems incredible. I am assuming that I must just be not understanding something about what this is. Can someone please ELI5.

5

Comments

You must log in or register to comment.

Red_AtNight t1_jaa7pho wrote

Modulus of elasticity is the relationship between applied stress, and strain.

If you try to bend wood by applying force to it, you are applying a stress, and the amount that it bends is called the strain. 1.8 million PSI is not actually that high of a modulus of elasticity, considering steel's is more like 30 million PSI.

Basically it tells you that wood is resistant to being deformed - but steel is significantly more resistant to being deformed.

5

breckenridgeback t1_jaaayq0 wrote

OP might be confusing a high elastic modulus with a high [yield](https://en.wikipedia.org/wiki/Yield_(engineering)) point. In this case, since wood is a relatively stiff material, it will yield long before it deforms by very much (here's a table with yield strengths for wood boards).

To rephrase for OP: the elastic modulus tells you how much wood deforms, but it doesn't tell you anything about when it will bend out of shape permanently or break. A wood board can't support 450 cars, but not because it gets squashed, because the load exceeds the yield strength of wood.

6

Turnip45 t1_jaagc5n wrote

Modulus of elasticity is a measure of how much something stretches when a force is applied provided you don’t stress it beyond its elastic capacity. It often correlates with strength, but not always.

To calculate how much something will stretch under a force:

Extension = Force x Length / (E x Area)

Wood has a decent modules of elasticity for its weight, but it’s E is lot less than most building materials. Something like 2-8% that of steel depending of species.

2