Viewing a single comment thread. View all comments

eerun165 t1_iuf6fho wrote

Water is cooled with a chiller, and pumped to FCU (fan coil units, basically a heat exchanger with a fan). The FCU blows air through its coil as the cooled liquid is pumped through the coil, the water absorbs heat, cooling the air. The heat then returns via the chilled water system to the chiller to be cooled again and go back out.

The chiller is a mechanical system using refrigerants to cool the liquid. The other output of the chiller is heated water, which then typically goes to a cooling tower (basically another heat exchanger) water flows through the tower as a fan pulls ambient outdoor air, which removes heat from that portion to go back and cool the chiller.

21

Shurgosa t1_iufg2yw wrote

How interesting that today is the day I finally revisit my FCU map update project at work and shit all the info into one document. We have like 20 of these goddamn things all scattered around the building in storage rooms, and areas that are surrounded by stairwells that seem to tie themselves into knots. The current maps being used are photocopied blueprints from the 1980s marked up with a highlighter.

6

Dirty_Hertz t1_iufyq6b wrote

Oh, I love those. I had some recent record drawing projects where I only had scanned ancient BS like you said and a set of survey markups from a guy who couldn't write to save his life. Couldn't tell the difference between 3, 5, or 8. They all looked the same!

1