Comments

You must log in or register to comment.

r3dl3g t1_iua41xi wrote

This is entirely too big of a topic (pun maybe intended) to cover in a single ELI5, so unless you give us an idea of what your hangup with infinity is, this isn't going anywhere.

15

ruffruffmeowruff t1_iua4iz8 wrote

In short infinity means never ending/continuous/forever and the infinity symbol depicts that meaning by a never ending loop cycle

5

ArkyBeagle t1_iua5nc2 wrote

Closest I can get is:

"Infinity is only a figure of speech, meaning a limit to which certain ratios may approach as closely as desired, when others are permitted to increase indefinitely."

Carl Friedrich Gauss

0

Ju135 t1_iua7kqo wrote

Feeling it can be described but not really understood.

To be unrestricted, to not desire, to be present, total, oneness. It feels neutral, not good and definitely not bad (anxious, unsettling...).

So you now got an explanation for the genuinely infinite as only our feelings are what we can fully perceive afterall.

−2

superbyrd22000 t1_iuacu6h wrote

So there are infinite many infinity but let's talk about the two most common one, countable and continuous.

Countable is any thing one can count, think of the number 0,1,2,3,4...78810836689017,.... This will go on forever thus infinite, but in a infinite amount of time one could count all of the numbers (this is not possible for human because we have finite time).

Continuous think of decimal pick two decimal call the larger one B and the sampler one A, then pick a decimal C; where C is in-between A and B, then repeat (C will now be B and one will pick another C) This will go one forever and you can always find another decimals that we didn't account for. One can't "count" all of the decimals because you can always pick another decimals between A and B.

Follow up point, the reason the first infinite is countable is because you can create a function to get to all of the number by adding one (in the example above), but you can make a function to get all of the decimals.

(Not quite el5 because of the math I know, but it's the best I know how to do)

3

86tuning t1_iuadijl wrote

infinity is not a number, it's an idea. so you can't have infinity plus one, or infinity divided by two.

if you count 1, 2, 3... and never stop, you'd never get to the end, because the series is infinite.

the kicker is that some infinities are bigger than others. consider the set of positive whole numbers or integers above. there's an infinite number of positive whole numbers. but there's also an infinite number of even numbers, and an infinte number of odd numbers. and the infinite number of whole numbers is clearly bigger than even or odd ones.

fun times, right?

2

timhamlin t1_iuaf7ze wrote

Another perspective on infinity is the coastline problem. If u measure a coastline you have to define the resolution of the map. If it’s in inches, rather than miles or yards it will result in a MUCH greater number for the same section of coastline. If u increase the resolution to infinity, you make the measure of the coastline infinite. There is an infinity in every minute dot.

1

Chromotron t1_iuao3yw wrote

This. "Infinity" has different meanings or interpretations depending on the field (mathematics, physics, philosophy, ...), context (sets, numbers, size, mind, ...) and much more. In other words, there is not the infinity, and listing&explaining all available options would be almost impossible, and definitely too long.

1

Chromotron t1_iuap2ai wrote

> One can't "count" all of the decimals because you can always pick another decimals between A and B.

This is unrelated to "counting". The rationals satisfy the very same property, yet can be counted. But all decimals, i.e., real numbers, cannot be counted, they are "uncountable".

Conversely, there are uncountable "discrete" ordered sets where nothing is between a number and its two neighbours. Hence the property you speak of and being (un)countable are independent, neither implies the other.

2

DavidRFZ t1_iuapi30 wrote

Yeah, you can paint an infinite area with a finite amount of paint.

The area under the curve 1/x from 1 to infinity… infinite.

The volume of the curve 1/x from 1 to infinity revolved around x-axis… finite!

The area clearly fits inside the volume!

But then you need to consider practical issues like the size of the atoms and molecules that make up the paint.

1

blow_up_the_outside t1_iuarx9a wrote

You can for sure have infinite numbers plus one, or divided by two.

Those kind of numbers are called transfinite numbers (ω, ℵₒ, m)

They are not finite, just not absolutely infinite (∞).

But a transfinite number t + 1 is, well, (t + 1) and t / 2 is (t / 2)

Which is not the case for ∞ + 1 or ∞ / 2 which both are still ∞

Maybe I shouldn't go into transfinite numbers in eli5...

1

snoias t1_iuav9h0 wrote

> So there are infinite many infinity but let's talk about the two most common one, countable and continuous.

I think you mean "uncountable", not "continuous". Or possibly "the continuum", which is sometimes used as a fancy word for the real numbers.

> Countable is any thing one can count, think of the number 0,1,2,3,4...78810836689017,.... This will go on forever thus infinite, but in a infinite amount of time one could count all of the numbers (this is not possible for human because we have finite time).

I don't think it's helpful to talk about what you could do in an "infinite amount of time", because like you said that's not possible, and it's not really obvious what we might be able to do given infinite time.

A more concrete way to talk about this is to say that, if we have a countable set of objects, we can come up with a way of listing them that will eventually reach any given object. For example, if we list the positive integers like 1,2,3,4,..., then you can pick any positive integer you like and it will show up in our list eventually.

> Continuous think of decimal pick two decimal call the larger one B and the sampler one A, then pick a decimal C; where C is in-between A and B, then repeat (C will now be B and one will pick another C) This will go one forever and you can always find another decimals that we didn't account for. One can't "count" all of the decimals because you can always pick another decimals between A and B.

But this just shows that your particular approach to counting them didn't work. Maybe there is a way of counting them that doesn't keep zeroing in on a smaller and smaller interval. In fact, for the set of all numbers with finite decimal expansions, there is a way.

1

breckenridgeback t1_iuaziy4 wrote

> Conversely, there are uncountable "discrete" ordered sets where nothing is between a number and its two neighbours.

That's not true, and it's (relatively) easy to prove.

Consider a set S that is a subset of the reals, with the property that for each s in S there exist two numbers u and l (for "upper" and "lower") such that u < s < l and there are no numbers x for which u < x < s or s < x < l. In other words, u is the "next biggest" number and l is the "next smallest" (this formalizes the idea you've stated informally).

For each s in S, consider the radius R = min(d(s,u), d(s, l)) (of course, R, u, and l all depend on s, but reddit markdown means I'm gonna skip the subscripts). This radius is basically just the "minimum spacing" around s. Such an R exists for each s, and is strictly positive. Since R is strictly positive, so is R/2. And since the rationals are dense in the reals, we can find two rational numbers a and b (again, also dependent on s) such that s - R/2 < a < s < b < s + R/2. In other words, we can find an interval of rational numbers (a,b) that does not overlap the corresponding interval for any other s in S.

Now, consider the function f: S -> (Q x Q) that takes each element s in S and maps it onto the ordered pair of the interval generated by the process in the previous paragraph. This function is clearly injective, since none of the intervals (a,b) overlap (so they certainly cannot be the same), but the set (Q x Q) is a Cartesian product of countable sets and therefore countable. Since we have an injection from S to a countable set, S is itself (at most) countable.

1

explainlikeimfive-ModTeam t1_iubfd3y wrote

Please read this entire message


Your submission has been removed for the following reason(s):

  • Rule #2 - Questions must seek objective explanations

  • ELI5 requires that your question be obvious from your post topic (Rule 2)


If you would like this removal reviewed, please read the detailed rules first. If you believe this submission was removed erroneously, please use this form and we will review your submission.

1

superbyrd22000 t1_iubgkx1 wrote

No I meant continuous with this definition "A continuous data set is a quantitative data set representing a scale of measurement that can consist of numbers other than whole numbers, like decimals and fractions. Continuous data sets would consist of values like height, weight, length, temperature, and other measurements like that. They're things that can be measured in fractions and decimals. Usually a tool, like a ruler, measuring tape, scale, or thermometer, is required to produce the values in a continuous data set." But yes the superset is an uncountable which would be the more encompassing definition but more difficult to understand.

As far as a method it's a el5, thus a master level proof would not be appropriate. Regardless the method I explained is the baseline for proving that a infinite is not countable via the proof of contradiction.

1

Chromotron t1_iue4c7b wrote

> Consider a set S that is a subset of the reals,

That's where you went wrong: the set is simply not required to be contained in the reals. You can give any set X a total ordering such that the induced topology is discrete; similarly, we can give X a metric that makes it discrete, the discrete metric.

1

breckenridgeback t1_iuenf2y wrote

Oh, I thought you were claiming an uncountable discrete subset of the reals (since your comparison was the rationals). Yes, obviously you can give any set the discrete topology (although the discussion of "between" suggests something more like an order metric?)

1