Viewing a single comment thread. View all comments

Rodnys_Danger666 OP t1_j885mw0 wrote

Yes, can I set a specific Line-Out signal/voltage to send to my preamp. The -2 has RCA output. Which I would connect to my McIntosh preamp. Hopefully it can output Line Level at a voltage my pre can handle.

And connecting the -2 XLR out to my THX-887 XLR Inputs to use that amp instead of the -2's internal amplifier.

I would be using the -2 as double duty. As a DAC for a Headphone rig. and as a DAC to a Stereo Preamp for two channel listening on my stereo system.

1

IAmAgainst t1_j88765g wrote

Oh, I understand your question now. The RCA maximum output value is 3.5V and for the XLR output it's 6.9V. However you can control the volume to avoid saturating your preamp input so that shouldn't be a problem.

In any case, you won't burn anything. If the input signal is too high you would just get a distorted output because of clipping at the input so you'd have to gradually increase the ADI-2's volume until you start noticing a degradation in sound.

Edit: you don't need the THX-887, you'd just be adding noise to the system and reducing SNR. Most likely imperceptible but still unnecessary. The ADI-2's built-in amp should be far superior, especially considering the integration with the dac that allows to balance digital and analog amplification to maintain the highest possible dynamic range and SNR.

2

Rodnys_Danger666 OP t1_j889f7v wrote

Thank you for your kind help. You've answered my questions completely. I like you, will be buying the Arya, just not the Stealth. I don't think my ears would tell the difference. And the Focal Radiance for late night gaming/movies.

1

IAmAgainst t1_j88o76k wrote

I'm glad I could help.. The Arya V2 doesn't have a good rep because of a huge gap they have in the frequency response, although that should be possible to correct with equalization. Which is why I find most headphones reviews useless since they only talk about each headphone raw as if equalizing wasn't a thing.

2