Viewing a single comment thread. View all comments

minnesotajersey OP t1_ix0uu5i wrote

Reply to comment by IMKGI in ANC app for generic ‘phones use? by minnesotajersey

Yes. Cool. Audio phase cancellation. Known about since the 30’s. How do my neckbuds deal with the latency issue that my phone would be unable to handle?

Is it the real-time software processing versus hardware-based that is the problem? I use an old PC that can de-click and de-hiss records in real time with zero delay between the processed and unprocessed sound.

Nerd fact: simply mixing to mono can get rid of a lot of surface noise on an LP through phase cancellation. I used that method in the 90s before DCART existed. My software now does it through DSP, though.

−5

IMKGI t1_ix0xf47 wrote

Mate, i already told you, processing power isn't the issue

You gotta get the bloody microphone signal into your audio cable (ADC) then send it through your cable, process it, send it back to your headphone (DAC) and then play it, if you look up the time a typical ADC and DAC needs, (don't expect anything fancy or super fast in a generic pair of headphones or phone) you'll be already above the ~0.05ms it takes for the soundwave to travel from your microphone to the speaker, no chance to cancel out anything, especially considering the phone doesn't know how far the mic and drivers are appart and what ADC your headphones are using

I told you, the biggest problem is latency, not processing power, i don't know why that's so hard to understand

7

minnesotajersey OP t1_ix130k3 wrote

Then how does the bloody signal get picked up by my neckbuds’ mic, processed through the ADC, processed by the DSP, processed through the DAC, sent through the amp, and into the drivers without said latency issues?

−7

IMKGI t1_ix165x6 wrote

As you probably know, ANC headphones aren't the best sounding devices out there, they are very likely trading processing time for speed to achieve desired results, the DAC and amp in a pair of ANC headphones are nothing like the one in a regular phone or headphone, but if you are interested in a DIY project I found this PDF: https://www.google.com /url?q=https://courses.physics.illinois.edu/phys406/sp2017/Student_Projects/Spring12/Danylo_Hirnyj_P406_Project_Report_Sp12.pdf&sa=U&ved=2ahUKEwj2jvSVrLv7AhWoXvEDHU24AGQQFnoECAQQAg&usg=AOvVaw05PJIiwqh6tUowxQ6KcHvZ Of a guy attempting to build a pair himself (Remove the space in the URL, it's before the / after www.google.com, Reddit blocked the original link)

5

atwl77 t1_ix1w0u7 wrote

The same way audio interfaces can offer "zero-latency" monitoring that would typically suffer from lag if the input needed to be routed to the phone/tablet/pc and back out.

3