Comments
Clickbaitllama t1_ixqji8o wrote
Definitly doable-able, but if you don’t already have a soldering iron and heat shrink, it would just be cheaper to buy a new cable
linuxboy123 OP t1_ixqe8ds wrote
Hey i bent and broke off one of the pins on the right 2pin connector on my zeros but i love the cable and don't want to spend money to get new one. So my question is how hard would it be to cut the connector and ~1cm cable from the right cable and solder it to the truthear cable?
irago_ t1_ixqx9pa wrote
It's easy, whether it'll look somewhat decent will depend on how well you do it.
[deleted] t1_ixqdry1 wrote
[deleted]
bubblejohns t1_ixsscnu wrote
A tripowin Karen is 10 bucks and quite nice. If you want better the zonie is 16 bucks and the best cable ever
ProfessionalTune4357 t1_ixqgd7z wrote
Impossible
NotDavidSchweizer t1_ixqj28s wrote
Not extremely hard, but it will look a bit jank, no matter how well you can solder wires together. I'd suggest cutting it off like 5-10 cm down from the connector so you can keep the whole earhook intact