Viewing a single comment thread. View all comments

KiyPhi t1_j1jwcmz wrote

Reply to comment by Svstem in Planars on speaker amps (HE-6, LCD-4, HEKv1) by Svstem

>Granted it wasn't blinded

This is a huge issue though. For a short anecdote on that, I recommend watching the ~1 minute story from this video. There are several parts before and after that explain why this happens and why non-blind testing can't be reliably used. I recommend people watch the whole video if possible, but that one anecdote from the video is a pretty good one. The speaker is basically the guy when it comes to how hearing works.

>What 100W speaker amp did you use, and what headphone amp did you compare it to?

I don't recall the exact model but it was a NAD one, I think a bit older than their current one. Rated for 100W into 4 ohms. Headphone amps were SMSL SH-9, also used a JDS Atom, which is the 1w amp I mentioned being sufficient. I also had a Topping A50 that I used which has likewise the same.

9

Svstem OP t1_j1k5d8r wrote

Those are some of the midrange NAD integrated amps, should be okay. But I've owned the C375BEE which was their TOTL integrated for a bit and I saw significant improvements going to different stereo units like the MC225, KSA150 and the 4B. If ever you're in the Montreal area I would invite you to blind test this chain with what you consider a sufficient headphone amp.

4

KiyPhi t1_j1k6gb2 wrote

I will keep that in mind. I don't get to travel much (at all actually), but if I ever am in the area, I'll send a PM.

1