Comments

You must log in or register to comment.

SupOrSalad t1_j6ev6k0 wrote

First of all... do you mean the entire Harman curve. Or just the bass shelf?

The Harman curve is more focused on the mids, which is why headphones like the Sennheiser HD600 are considered as close to the Harman curve, despite having a lot of bass roll off.

Harman isn't just about the bass, and even the Harman research says to adjust bass and treble to your preference.

8

ShepherdessAnne OP t1_j6evhrn wrote

The whole thing.

But especially the treble roll-off.

0

SupOrSalad t1_j6evqq8 wrote

So you're looking for something with less mids and more treble?

2

ShepherdessAnne OP t1_j6ey8kj wrote

Flat. I want it flat. +/-3db. Flat.

0

pinkcunt123 t1_j6ezrsq wrote

You mean flat raw? Like a straight line without any compensation?

2

ShepherdessAnne OP t1_j6f1dn1 wrote

Not quite. I'd like compensation as long as it makes it as close to flat as possible in the ear, not "pleasing".

2

BionicSammich t1_j6fmhmj wrote

I don't think there is such a thing. The only way to find this out is to basically un-compensate graphs and revert them to raw.

You could get yourself some test equipment and just purely measure the dB across a sine sweep on various headphones until you find one with no dips or peaks anywhere, but I doubt you'd find any set thats truly flat.

2

Pigeon_Chess t1_j6eybae wrote

The Harman curve is literally bass boosted and is a V shape

0

SupOrSalad t1_j6ezraw wrote

I wouldn't really call it v shaped. More of a downward tilt with an optional bass shelf.

1

Pigeon_Chess t1_j6f09ao wrote

It’s a target curve, nothing is optional. It has boosted bass. It it nowhere near flat and the HD600 is nowhere near the Harman target

0

SupOrSalad t1_j6f1eqv wrote

The Harman research says to adjust bass to your liking. The bass shelf was originally there because that's what room acoustics do when you take flat speakers and put them in a normal room, which was the basis for the target. From that there was some adjustments based on different user groups for the amount of bass, and the current shelf is what 60% of listeners preferred, but the research also says that more "trained listeners" prefer less bass, and again you are supposed to adjust that to your preference.

People hyper focus on the bass, but the upper mids and treble is a big part of the Harman target. If you put the HD600 response on the Harman target and compensate it to the target, the HD600 looks very consistent with the target above the bass.

1

Pigeon_Chess t1_j6f1ids wrote

That not the target though is it? That’s them telling you to EQ because their target is a bag of shit.

1

Clickbaitllama t1_j6exlfi wrote

Iems or headphones? I love headphone Harman, but hate the upper mids emphasis on the iem Harman.

2

ShepherdessAnne OP t1_j6ey5pd wrote

Headphone. The whole notion of pouring audio science into a non-representative sample of people for what is most subjectively "pleasing" is something I could rant about for way too long.

−1

BionicSammich t1_j6flsul wrote

I think the whole point of the Harman curve is that they tested the preferences of a bunch of people and came up with an average preference.

I don't understand why you have a problem a line on the graph thats basically arbitrary. You can still use it to find headphones that you like. If you like less bass, find sets that fall under the harman curve in the bass region on an FR graph. Like more treble? Find one thats above the curve in the treble region.

1

ShepherdessAnne OP t1_j6fn101 wrote

The problem is its dominating the market and everything is getting tuned around it. New product? Harman curve. Boo!

0

BionicSammich t1_j6fnxm5 wrote

So find headphones that aren't tuned around it. What are your preferences?

2

ShepherdessAnne OP t1_j6fqgwn wrote

Flat.

1

BionicSammich t1_j6frsjm wrote

And what is your context for flat? How do you quantify flat? Is Crinacle's IEF target "flat" to you? Do you want to look at a graph with a harman target and just see a flat line that ignores the target? Because thats technically flat if you don't consider the raw data.

2

ShepherdessAnne OP t1_j6fsa52 wrote

Compensated, comes in flat to the majority of ears.

The problem is one of imaging. IEMs can be perfectly flat but sacrifice Soundstage. You can get your floorstanding speakers fairly flat either out of the box or via EQ or both.

But headphones? Everyone is targeting this same curve because they want that mass market appeal, despite the fact that the mass market doesn't care as much about critical listening as it does about comfort. It's frustrating. I'm big mad about it.

0

BionicSammich t1_j6fvida wrote

Ok so you just want a rant and not a solution. Best of luck with that.

3

ShepherdessAnne OP t1_j6fwdwg wrote

Yes this is why I flared it with drama.

Technically EQ is a solution. Fine. But then why even bother? It's all the same tuning.

It would be like having every car drive about the same. What would be the point of that?

1

BionicSammich t1_j6fyr6l wrote

I don't get what you are searching for. Harman is basically just a bit of extra bass and a bit of extra treble. Want it flat? Just reduce the bass and treble shelfs. Use Crinacles graph tool to visually test it out.

What headphones do you have? I'll make you an EQ profile you can import into Peace.

3

ShepherdessAnne OP t1_j6gindn wrote

Thank you for the offer, however unfortunately I'm in the process of dramatic customization for my daily drivers and will get back to you after the project is complete.

It's just infuriating that this is even necessary, though. I mean yes, everyone should know their way around EQ. Cool, I get that. But the thing is the goal shouldn't be so homogenous. It's been getting worse and worse as the years have gone by and it's like, dude, for higher end products can we please just leave that kind of tuning up to the listener? If you're buying an amp and balanced cables you probably know your way around an EQ.

1

BionicSammich t1_j6hfdy3 wrote

Have you ever considered that headphones in general just aren't fir you? You seem to be wanting a sound that doesn't really exist. Harman isn't a million miles away from flat. I've played with EQ with the aim of making stuff "flat" before and you just end up with an ass load of mids and not much else.

2

headphones-ModTeam t1_j6f09a9 wrote

This post has been removed. Please note the following rule:

>Rule 2: Ask purchase help questions in the Shopping and Setup Help Desk found at https://reddit.com/r/headphones/about/sticky > >Requests for product opinions, comparisons, and general purchase advice must be made in the dedicated Shopping and Setup Help Desk found at /r/headphones/about/sticky instead of a new post.

You may also use r/headphoneadvice but please search their resources and familiarize yourself with their rules first before posting.

What questions are considered purchase advice?

  • A request for product suggestions, comparison requests, or opinion requests fall under the purchase advice rule. These can often be found by searching first.

  • Any suggestion or comparison request pertaining to headphones, IEMs, DACs, amps, or other accessories should be directed to the purchase help thread or r/headphoneadvice.

  • Asking the subreddit to help make a decision to buy a product does fall under this rule (e.g. "should I get dekoni pads for my HD650?").

Why does this rule even exist?

What if the link doesn't work?

  • The post can usually be found on the top r/headphones, and titled Shopping, Setup, and Technical Help Desk.
1