Viewing a single comment thread. View all comments

tachyon8 t1_j53yzag wrote

I was there for all of it. I don't see why its just this headphone that couldn't be measured properly and he measured two of them and they both produced different levels of distortion and bass.

−1

Rogue-Architect t1_j54753z wrote

Well there are two things that go into that:

  1. As it retains to my comment. It wasn't about the headphone it was about his methodology and laziness. He is well aware that industry standard practice is multiple seatings and using an average and for good reason. But no no no, not for good ole "Mr. Measurements", he trusts his ears, they are afterall, so well trained that they are registered pieces of scientific equipment. Let me repeat that, "Mr. Objectivity" doesn't use the industry standard practice but instead uses his ears because he is too lazy to do multiple seatings. Should we get into the levels he listens at and how much hearing loss he must have suffered at this point? No? Are his ears not susceptible like us mere mortals?
  2. Whether having that high of a level of distortion is another thing. I am not here to defend Abyss and it does seem strikingly high. But it always comes back to one important thing, is it audible? Well as someone that has owned the Diana V2, and moved on from it because it wasn't their taste, it is 100% inaudible. I even played around with EQ a lot on that headphone even adding >+6db bass shelfs and still, absolutely nothing. So the question is, why if it is not audible, does he hammer the point home and compare <$50 headphones to them saying they are the worse than those even if they were the same price? Why did he double down on everything and try to use big words to make himself not look like a hack? I don't know. What I do know is that Amir is a fraud and has been proven so many times. None of this would matter if he didn't claim to be an objectivist and all about the measurements when his own laziness doesn't even allow for him to do the bare minimum. But as it stands he keeps preaching and thus, he deserves to be exposed.

At the end of the day, I traded mine for an LCD-5 and would never go back. Although they did have a naturalness to their midrange that I had never heard before and still never since. I don't even know how to describe it other than it just felt like the singer was truly in the room with me I was in the room with the singer when I closed my eyes. It was the first time music videos annoyed me because I could tell the room the instruments were recorded in was not the same room the video was shot in because the reverberation of the room was all wrong. I have never experienced anything else that had that quality.

8

TRX808 t1_j54qwpt wrote

Amir basically runs a cult so many people active on ASR don't really care if his measurements are meaninglessly or not and many are convinced bigger / lower number = better / worse even if it isn't audible. Amir also does his "listening tests" after measuring but his 70 year old ears are infallible. On the other hand the Abyss guys seem like pretentious clowns.

I think Amir and Abyss deserve each other.

8

tachyon8 t1_j56562n wrote

Ugh, you're just repeating tired old things that have all been settled over there. Like the sustained 94db vs peak and on the mounting... You just don't like him or the people on the site and you're missing the point of that site in general as its not headfi. Its about the objective performance of the hardware. You just don't like him or his listening conclusions even though it seems that you accepted the hardware results. I don't read audiophile review articles about impression as they are worthless to me. The data says far more if you have reference points to compare it to. Again the site is about hardware not his listening conclusions.

I had the diana v2 as well and I thought it was "meh" too. Probably a reason you like the LCD-5 despite it having a similar FR, ear pads and closeness to the ear is the incredibly low amounts of distortion. Even though you EQ'd a bass shelf on the Diana the distortion from bass is far less audible than in other frequencies. The fact that the distortion is so bad in the places that matter if you wanted to EQ on top of it being so bad stock, is an objective failure for an audio company selling high "fidelity" audio, as its not.

1

Rogue-Architect t1_j56w166 wrote

I think maybe you should listen to the “tired old things” because they are true. They are only settled for Amir’s sheep. Amir is the worst and most dangerous influencer in this hobby because he is a fraud. Zeos, Josh, etc may not be trustworthy but they never claimed to be objectivists. Amir claims objectivity and science and then runs bull shit tests with his own intuition and then castigates anyone that disagrees with him along with his minions (you) because, ya know, science or something. So Zeos and Josh get a pass because they are not claiming to be anything so no harm no foul, but Amir does not get a pass and why I refer to him as a fraud. You bring up not liking him and you are correct, but that has nothing to do with him personally but instead his laziness and unscientific process that he then tries to make people feel bad about by using big words that he then comes to also be found incorrect on.

You are also incorrect that I trust his hardware measurements. I do trust the measurements resolve did, because he follows industry standard practices, and am not trying to claim the Diana does not have high distortion numbers. I also have no ties with HeadFi other than I use their classifieds.

I do find it sad that you think a graph can tell you all you need to know about headphones when our current measurement/interpretation ability is not able to tell use a fair bit about a headphone I.e. slam, detail, soundstage, etc. just use your own ears and you will see how wrong Amir is.

Your last point is just flat out wrong. I EQd more than just bass and never had a single issue with distortion. I’m inclined to believe you have never heard a Diana because you just keep taking about distortion. Again, it wasn’t the headphone for my taste, but if you are bringing up distortion as if it is audible in anyway you are a liar or probably bought shitty source equipment based on Amir’s recommendation.

Happy Listening! (Does not include sine sweeps)

0

tachyon8 t1_j57opcu wrote

Your points are mostly about your self admitted animosity towards Amir and constructing false framing, false dichotomies and straw men. I have no interest in debating that. Also, you can't tell me what I hear or don't hear or what headphones I have owned or how data is useful for me and in what way.

I keep talking about distortion because that is what these "TOTL" high "fidelity" headphones produce and it can be audible and these headphones obviously have variations in how they preform. Abyss is selling people a "feeling", not fidelity. Pretty obvious why you like your LCD-5 more, IMO.

I'll continue to listen to 1khz sine sweeps, its all I listen to, and I sometimes sit in silence with my headphones on listening to graphs..../s

0

Degru t1_j58fmtb wrote

In the case of the Abyss, he both measured it wrong and it's also just a bad headphone, intentionally compromised to produce a certain coloration (which to many people is enjoyable, I suppose).

It's also a bit tricky to gauge what constitutes "correct" measurement because the Abyss headphones are intentionally ported, meaning even perfect seal on rig produces some bass rolloff. Even so, the distortion there is still unacceptable for the price, that much I agree with.

Another example of him measuring wrong is any of his Stax reviews. You'll see that his Stax plots all have extreme rolloff in the bass, which just is not the case when properly fitted on a human head.

It's known in the community that the contour of Stax pads makes it hard to seal properly on traditional measurement rigs which do not have malleable human skin. They're designed this way to avoid needing any clamping force, preventing pressure and damage to the delicate diaphragm.

Despite having this explained, Amir hand-waves it away by claiming this is also how he hears them on his head. Which is within the realm of possibility of course (and is a fair criticism to make that the headphone is not suitable for some head shapes), but is not representative of the real performance of the headphone in normal circumstances.

Then there's his Stax amplifier measurements, where he argues with Kevin Gilmore after being told that his measurements are totally wrong due to using an incorrect load, forcing the amps to drive something they were never intended to.

It's a common theme for Amir to double down on his incorrect takes and try to discredit people who criticize him.

I've noticed that even a lot of his less questionable measurements end up being incomplete, and he basically just measures whichever plots he feels like at the time, instead of providing a consistent test suite to compare different amps with. Just look at how many times someone in the comments has to ask him to make a 32-tone FFT, for example.

Then for the longest time he never bothered to get a balanced 32 ohm load, making it impossible to compare balanced with single-ended amps from his measurements. It would've been as simple as soldering two resistors to an XLR connector, but he never bothered.

It's lazy and unacceptable for someone claiming to be "scientific".

I wouldn't care as much if it weren't for his large following, so the misinformation ends up being propagated far and wide and defended by people who understand even less about audio gear.

3