Viewing a single comment thread. View all comments

YouAreGenuinelyDumb t1_jdhsmu6 wrote

80% can be good, but it’s pretty dependent on what it is. Off the top of my head, I would think that an 80% removal would be helpful if other, more effective methods have lower throughput. So you could do bulk removal through this method, followed by further purification. This would be helpful if throughput is limited by the amount of contamination vs volume of water to purify.

185

Kaeny t1_jdl5lwp wrote

Just keep doing that 80% until it is diluted enough or filtered enough. 80% of 20% is 16%, so you have 4% left, then you have 0.8% left ezpz

Idk if this works it is most likely wrong

−2