Yeah and those are really functions of the energy density of the chemistry.

I would argue that things like overcharge and impact/crush are less of a concern as we move forward, since overcharge has been largely made a nonfactor by more sophisticated charging software and impact is largely addressed with proper pack design, but LFP definitely remains an attractive option from the safety point of view.

Primarily, the relatively good thermal prop performance is what many are interested in. High nickel chemistries have a lot of latent energy and volatile electrolytes that make battery fires aggressive and dangerous. LFP, having far lower latent energy, is much less prone to a runaway reaction - in which the becomes hot enough to self perpetuate an ignition burning through it's electrolyte and active material - which means it's far less likely to propagate to nearby cells and cause a chain reaction that we see as a massive EV car fire.

The battery did not degrade to 50% capacity in 15 years, unless it was barely used and babied for the entirety of that time.

Capacity degradation happens over the life of the cell and you can see substantial loss in 3-5 years of normal use.

So when you're starting with a chemistry that's already poor on range, and then reducing that range by 20-30% within the first 5 years of it's life, you can see where customers would be unhappy with the performance.

> Iv got a 15 year old pack still at 50%+ capacity.

That may be a selling point for a small niche of drivers, but telling someone that their vehicle will degrade to roughly half the already low range is going to be a hard sell.

LFP struggles to hit something like 300 miles in very large packs, degrading to ~150 miles in a few years and having further reduced performance when it's cold out is a really hard sell.

LFP struggles with range and cold weather performance. The energy density of the chemistry is very poor compared to high nickel based chemistries, and leads to very heavy and expensive packs to meet range targets (more cells to hit the same energy).

It's primary advantages are in it's comparatively better thermal propagation performance and in cost - although the need for additional cells to meet range and the piss-poor recycling economics (LFP costs more to recycle than it's individual components are worth) eat into this financial advantage.

If you read the article, you'd see that the new chemistry is LFP - Lithium Iron Phosphate - which has been around forever and is still a lithium ion based chemistry.

Nickel, like Nickel-Cobalt-Aluminum (NCA) or Nickel-Cobalt-Manganese (NCM).

It's shorthand for the cathode chemistry.