bestjakeisbest t1_je6rdix wrote on March 29, 2023 at 8:30 PM

Reply to [OC] Loot by colmscomics

Doctor: its like a scalpel but longer.

bestjakeisbest t1_j9xw6rd wrote on February 25, 2023 at 10:25 AM

Reply to comment by Byelof in A 2-year-old boy was lost in the Florida woods for 24 hours. Everyone feared the worst. Hundreds of volunteers came out to look for him. One volunteer came to a fork in a field: right or left? He trusted his gut, went left and soon heard a whimper. It was the little boy, crying but in good health. by ConquerWyoming

It was a forked up field

bestjakeisbest t1_j2bh60t wrote on December 31, 2022 at 12:45 AM

Reply to installing a 4in round vent into an exterior door by jpence1983

If you have a window near where you have your 3d printer I would recommend just putting a hole in a plywood board and running a tube from your printer to the hole in the board and just mount the board to the window by opening the window and then closing it on the board, this way you dont have to modify any door (doors are more expensive and a pain to work with) if you want better airflow I recommend a 3 inch tube and an inline fan.

bestjakeisbest t1_isu31c5 wrote on October 18, 2022 at 6:33 PM

Reply to comment by trapkoda in Woodland creatures by Kabourek4

Same

bestjakeisbest t1_isftdsp wrote on October 15, 2022 at 5:30 PM

Reply to New homeowner internet struggles by KCDPT

Have the cable run to a closet and to your living room where you would put your TV, from the closet put a server rack and install a network switch and a patch panel, for home use you dont need that many ports so you can get away with a cheap switch. And then you can run ethernet to your rooms, and a few wireless access points. This will also set you up to put say a media server in that closet so you can access movies from anywhere in the house, or use a server set up there for backups. Down the line.