daveb814 t1_islltov wrote on October 16, 2022 at 10:06 PM Reply to Deck sanding help! Orbital Floor Sander leaving lines by AsianAssHitlerHair As others have said, those are high and low spots. If the lines were from the sander, they would all be the lighter color, not dark and light. Put some 60 grit on and take your time. After everything is smooth, switch your way to 80 than 100. Permalink 1
daveb814 t1_islltov wrote
Reply to Deck sanding help! Orbital Floor Sander leaving lines by AsianAssHitlerHair
As others have said, those are high and low spots. If the lines were from the sander, they would all be the lighter color, not dark and light. Put some 60 grit on and take your time. After everything is smooth, switch your way to 80 than 100.