peachfuzz0
peachfuzz0 t1_iw4i3it wrote
Reply to comment by skinnywolfe in Running wire to power this 20x10 shed for an office. What wire do I need? by skinnywolfe
100A is a bit overkill for a shed, you can get away with 40 or 60 but if you have it already then keep it. 100A requires 2ga al or 4ga copper, which is not cheap.
If you can diy it, solar is a fun project. Plenty of YouTube videos about it.
peachfuzz0 t1_iw4h80w wrote
Consult an electrician to be sure but I believe you need a sub panel from your main panel to your shed.
You could also consider installing an off grid solar setup with batteries.
peachfuzz0 t1_iw4injb wrote
Reply to comment by skinnywolfe in Running wire to power this 20x10 shed for an office. What wire do I need? by skinnywolfe
Likely yes. 40a requires 8ga wire and that would give you 2 15A 120v circuits so roughly 3600W.