Just going to piggy back here cause I can’t reply to your original post for some reason.
The new fixture he bought doesn’t have an output for the sensor. You need a fixture with that output to get the rest of the lights to work again.
As for your other question. It depends. You’ll have to take the light off that you want to replace with a motion and check if it has the 3 wires in the box or not. If it does it will be white to white and fixture black to red with the black of the cables just passing through the box. If that’s what you see then you can add a motion there as well. If you only see the black and white then you can’t without some sort of wireless sensor that Im not sure exists.
pharraoh t1_j27ftv3 wrote
Reply to comment by Felaguin in 2-wire motion sensor/light on a 3-wire fixture by Felaguin
Just going to piggy back here cause I can’t reply to your original post for some reason.
The new fixture he bought doesn’t have an output for the sensor. You need a fixture with that output to get the rest of the lights to work again.
As for your other question. It depends. You’ll have to take the light off that you want to replace with a motion and check if it has the 3 wires in the box or not. If it does it will be white to white and fixture black to red with the black of the cables just passing through the box. If that’s what you see then you can add a motion there as well. If you only see the black and white then you can’t without some sort of wireless sensor that Im not sure exists.
Hope that helps.